P2 Panel System

The P2 panel system is an easy to assemble, prefabricated partition system suitable for floor to ceiling applications. It is designed and engineered in Italy.

Inquire now

School     Office     Seating

Enter the code here :

Product Specifications

Configuration:floor to ceiling, with a maximum height of 3 meters.

Anchoring:special co-extruded plastic floor and ceiling tracks are anchored in accordance with the layout.

Panel holding:panels are leveled and held by a specially designed plastic blocking system in the floor track.

Verticals:are made out of specially made aluminum extruded profiles. For corner applications, the profiles are used in combination with MS tubes.

Trims:top and bottom trims, consisting of special aluminum extruded profiles. The top trim is 60mm, and the bottom trim 80mm wide.

Doors:full frameless glass, framed glass or board door.

Door height:full height, or lower with one glass panel above the door.

Power /data cabling:routed through the bottom or top tracks. A special cable sheet metal panel is used where cables are required to be brought down to a usable height on the partition.

Standard module widths:60, 75, 80, 100 & 120 cm

Panel width:  55mm

Surface finishes:the entire height can be offered either in toughened glass (10mm thick) or board panels (40mm thick). Board panels can also have fabric cladding.